Female Header is a type of connector.
This connector is widely used in electronic, electrical, instrument
in the PCB circuit board, its role is in the circuit is blocked or
isolated between the circuit, play a bridge function, take up the
task of current or signal transmission.
Usually used with row pin matching, forming a board-to-board
connection; Or matching with the electronic wiring harness
terminal, forming a board-to-wire connection; Can also be used
independently for board to board connection.
Because different products require different specifications, there
are also a variety of sizes.
Y-shaped terminal: it has two contacts with the pin, but the
terminal is 0.64mm thick. The pin can be lengthened and the rubber
core can be overlaid to realize the secondary heightening of the
pin.
U-shaped terminal: there are 3 contact points with the row pin, the
contact point is at the top of the product, the contact is stable
to avoid transient break in the process of signal transmission.
U-type leakproof tin terminal: there are 3 contact points with the
pin, the contact point is on the top of the product, the contact is
stable, avoid transient during signal transmission, prevent tin
from leaking into the terminal.
O-type terminal: there are three contact points with the row pin,
the contact point is in the center of the product, the contact is
stable to prevent transient interruption during signal
transmission.
O-type leakproof tin terminal: there are 3 contact points with the
pin, the contact point is in the center of the product, the contact
is stable to prevent the signal transmission transient, prevent tin
leakage into the terminal.
Busbar is widely used in vehicle-mounted monitoring,
instrumentation, Internet of things, new energy vehicles, LED
display field, POS machine and scanner, lighting industry, security
industry, electronic toys, household appliances, etc., providing
the most reliable connection board to board and wire to board.
The spacing can be roughly divided into 0.8mm, 1.00mm, 1.27mm,
1.5mm, 2.00mm, 2.2mm, 2.54mm, 3.0mm, 3.5mm, 3.08mm, 5.08mm
The number of rows can be roughly divided into: single row, double
row, three row, four row, etc.;
The height can be roughly: H2.0, H2.2, H2.8, H3.4, H3.5 H4.3, H4.6,
H4.9, H5.0, H5.7, H6.35, H7.1, H7.2, H8.5, H10.0, H11.0, etc."
SMT(horizontal paste/vertical paste), plug-in DIP(straight
insert/bend insert), splint, etc. (According to the installation
method :180 degrees by S, 90 degrees by R, SMT by T)
